How Do You Service The Abs System On 2009 Cadillac Srx

If your Cadillac ABS light stays on, the anti-lock restriction organisation has detected a problem. Anti-lock brakes, traction control, and stability command will brake system has detected a problem. Anti-lock brakes, traction control, and stability command will be disabled.

Symptoms

Cadillac abs light on

ABS Light Stays On,
Longer stopping altitude,
Service Stabilitrak Alert Bulletin
Service traction control low-cal ON
Traction command and stability lights ON

When your ABS fails, you may too get a warning message asking you to service ABS, Traction Command, and Stabilitrak.

Why is my Cadillac ABS low-cal on?

The most common trouble that triggers the ABS lite to stay on in a Cadillac vehicle is a faulty ABS bicycle speed sensor. Cadillac vehicles have four ABS cycle speed sensors, one for each bicycle. To find out which one is faulty, follow the steps below to read the codes from the ABS module.

Possible problems that tin can trigger the ABS light on a Cadillac include:

A faulty or dirty wheel speed sensor,
Defective steering angle sensor,
Damaged wires,
Bad ABS module
Blown fuse
Bad ABS relay

Any of these bug can trigger the Cadillac ABS calorie-free to stay on.

How to Read and Reset Cadillac ABS Light

To discover out why your Cadillac ABS light is on, you need to read the ABS module's mistake codes. This process can be performed past your Cadillac dealer, a local machine mechanic, or yourself.

In this guide, we are going to show you how to read fault codes from the ABS module of your Cadillac. Once yous get the codes, yous will demand to fix the related trouble earlier you can reset the ABS light.

What you will demand

ABS Scanner for Cadillac

Process

Follow these instructions to read and reset ABS fault codes on Cadillac vehicles 1996 and newer. This method works on models such as ATS, CTS, XTS, CT6, XT5, Escalade, SRX, DTS, STS, BLS, XLR, and Deville.

Park your Cadillac in a safe surface area where you tin can work. Locate the Cadillac OBD-2 port nether the dashboard.
Your browser does not support video tag.
Connect your OBD-II scanner.
Plow on the ignition. All Cadillac dashboard lights should plow on but do not start the engine. If your Cadillac has Kickoff/STOP button, press it twice without pressing on the restriction pedal.
Allow your Cadillac OBD-two scanner to connect to the Engine Control Unit of measurement (ECU). This may take a few seconds.
Select Cadillac from the menu. Manually select the Anti-lock Brake SystemBrake Organization bill of fare.
Read codes from the Cadillac ABS module using a Level 2 OBDII scanner such equally Launch Reader.
In one case you fix the trouble that was discovered in the previous step, come back to the ABS menu and clear Cadillac ABS codes.

Don't use a generic OBD-II scanner. A generic scanner will display no error codes even if the ABS light is on. For this procedure, an ABS Scanner is needed.

If your scanner cannot communicate with the ABS module, it is possible that the ABS module is defective and information technology needs to either exist replaced, which tin can be an expensive repair, or utilise a third party that provides Cadillac ABS Module Repair Service on eBay.